Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
Customized Industrial Radio Remote Controls for Overhead Travelling Crane Electric Hoist
Customized Industrial Radio Remote Controls
,Industrial Overhead Crane Remote Control
,Electric Hoist Radio Remote Controls
Industrial Remote Control F21-E1B for Crane Overhead Travelling Crane Electric Hoist Wireless Remote Control
Product Information
| Model No. | Transmitter F21-E1B |
| Housing Material | Glass Fiber Reinforced Nylon |
| Ingress Protection Rating | IP65 |
| Power Supply | 2 pieces of AA alkaline batteries |
| Transmit Power | ≤10dBm |
| Security Code | 32-bit (4.3 billion combinations) |
| Operating Temperature Range | -40℃ ~ 85℃ |
| Control Distance | Up to 100 meters in open area |
| Model No. | Receiver F21-E1B |
| Housing Material | Glass Fiber Reinforced Nylon |
| Ingress Protection Rating | IP65 |
| Power Supply | 10A fully sealed relay output |
| Receiving Sensitivity | -110dBm |
| Security Code | 32-bit (4.3 billion combinations) |
| Cable Length | 1.5 meters (customizable) |
| Control Distance | Up to 100 meters in open area |
Remote Control Functional Features
- Equipped with 8 function buttons: 6 dual-speed buttons, 1 start button and 1 stop button.
- Built-in battery voltage alarm device, which automatically cuts off the circuit when the voltage is low.
- Comes with a safety key switch to prevent unauthorized operation.
- Button function modes can be configured by connecting the remote control to a computer via a data cable.
- Up/Down, East/West, South/North directions support configurable inhibition modes, including jogging, inching skip and interlock.
- The start button can be programmed via computer to work in normal, self-locking or acceleration mode.
Differences Between Crystal Oscillator Version and E-Card Version
F21-E1B Crystal Oscillator Version
The genuine product consists of three circuit boards matched with crystal oscillator quartz crystals. It supports stable simultaneous operation of multiple remote controllers within one workshop with no signal interference or conflict. It also supports data reading via data cable, transmitter matching and data copying functions.
F21-E1B E-Card Version
Adopts a unique two-circuit-board design with an embedded E-card storing encoding data. If the transmitter malfunctions or gets lost, users only need to remove the E-card and insert it into a new transmitter. The program will be automatically written into the new remote controller to complete pairing, enabling convenient on-site maintenance.
Wear Resistance Ball Mill Shell Liners Mining Wear Parts Customized Size
Mining Hydraulic Bolt Punch Tool 1500J Impact For Ball Mill Liner Removal
Large Cast Steel Split Girth Gear Heavy Duty for Ball Mill Mining Equipment
